CDVFD - A-36 PART-A, EPOXY RESIN

  • MSDS: CDVFD
  • Manufacturer: MORTON INTERNATIONAL
  • Product Name: A-36 PART-A, EPOXY RESIN
  • National Stock Number: 8040-00-159-4846
Product Identification

Product ID:A-36 PART-A, EPOXY RESIN
MSDS Date:01/30/1991
FSC:8040
NIIN:00-159-4846
Kit Part:Y
MSDS Number: CDVFD

Responsible Party
MORTON INTERNATIONAL
100 NORTH RIVERSIDE PLAZA
CHICAGO, IL 60606-1596
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 312-807-3212

Cage: DO471

Contractor
MORTON INTL INC SPECIALTY CHEMICALS GROUP
CHICAGO, IL 60606-1218 US

Telephone: 312-807-2000

Cage: 32063

Ingredients

BISPHENOL A-EPICHLOROHYDRIN COPOLYMER; (BISPHENOL

CAS: 25068-38-6

RTECS: SL6475000

Fraction By Weight: 90-100%

OSHA PEL N/K

ACGIH TLV: N/K


SILICA GEL; (SILICA, AMORPHOUS/SILICON DIOXIDE, AMORPHOUS)

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 5-10%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3


CLTHG, CLEAR AIRWAY, & KEEP PERS WARM. NOTE TO MD

RTECS: 9999999ZZ


ADMINISTERING TO THE SYMPTOMS AS THEY OCCUR, AND

RTECS: 9999999ZZ


MUTAGENIC ACTIVITY IN OTHERS. CHROMOSOMAL

RTECS: 9999999ZZ


MAY CAUSE MECH IRRIT TO OCULAR TISS.

RTECS: 9999999ZZ


TO AMORPHOUS SILICA DUSTS CAN LEAD TO DEVEL OF

RTECS: 9999999ZZ


REQS. BE SURE TO CONT APPROP GOVT ENVIRON

RTECS: 9999999ZZ


METHS OF DISP CURRENTLY AVAIL, IT IS REC THAT

RTECS: 9999999ZZ


(1)

RTECS: 9999999ZZ


FACILITY, (3) TREAT AT ACCEPTABLE WASTE TREATMENT

RTECS: 9999999ZZ


SOLIDIFICATION OR FIXATION MAY BE REQUIRED PRIOR TO

RTECS: 9999999ZZ


RESPIRATOR. IN ADDITION, RESPIRATORY PROTECTION

RTECS: 9999999ZZ


HOWEVER, LOCAL EXHAUST VENTILATION IS RECOMMENDED

RTECS: 9999999ZZ


SHOULD BE THOROUGHLY CLEANED AND DRIED

RTECS: 9999999ZZ


AS FULLER'S EARTH, CLAY/OTHER APPROP SYNTHETIC

RTECS: 9999999ZZ


FURTHER HNDLG & DISP. APPROP SFTY MEASURES & PROT

RTECS: 9999999ZZ


OTHER BODIES OF WATER UNLESS AUTHORIZED TO DO SO BY

RTECS: 9999999ZZ


PEL, OR IF HIGH AIRBORNE CONCS CAN OCCUR, EVACUATE

RTECS: 9999999ZZ


OR SCBA, SHOULD BE USED FOR ENTRY INTO ENCLSD

RTECS: 9999999ZZ


MORE HAZ SUBSTANCES LISTED EITHER BY U.S. EPA

RTECS: 9999999ZZ


APPENDIX), FOR WHICH A "REPORTABLE QTY" (RQ) HAS

RTECS: 9999999ZZ


ESTABLISHED RQ IS RELEASED INTO ENVIRON, NATIONAL

RTECS: 9999999ZZ


IMMED. THIS PROD MAL ALSO CONTAIN EXTREMELY HAZ

RTECS: 9999999ZZ


TITLE III (40 CFR 355.40). OTHER FEDERAL, STATE,

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:SEE INGREDIENTS.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYE: CONT W/OCULAR TISS CAN
CAUSE MILD TO MOD IRRIT. SKIN: CAN CAUSE MILD TO MOD IRRIT. CONT
CAN LEAD TO DEVEL OF HYPERSENSITIVITY (ALLERGY) IN SUSCEPTIBLE
INDIVIDUALS. INHAL: UNDER NORM CNDTNS OF USE, NO ADVERSE EFTS ARE
EXPECTED. INGEST: RELATIVELY LOW ORDER OF TOX & NOT EXPECTED TO
PRDCE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: ANY ADVERSE EFTS FOLLOWING ACUTE
EXPOS. DEPENDING ON RTE, FREQUENCY, & DURATION OF EXPOS, TOX MAY
OCCUR IN EYE, SKIN, IMMUNE SYS (ALLERGIC RXNS). TOX INFO: ING 1:
MOD IRRIT TO EYES & SKIN. M AY CAUSE SKIN SENSIT. HAS BEEN SHOWN
TOBE MUTAGENIC IN SOME MICROBIAL ASSAYS, BUT HAS FAILED TO PRDCE
(ING 5)
Medical Cond Aggravated by Exposure:INDIVIDUALS WITH MEDICAL CONDITIONS
INVOLVING RESPIRATORY SYSTEM, SKIN, IMMUNE SYSTEM AND/OR SPECIFIC
CHEMICAL ALLERGIES MAY BE MORE SUSCEPTIBLE TO THE POSSIBLE EFFECTS
PRODUCED BY OVEREXPOSURE.

First Aid

First Aid:EYE: FLUSH W/STEADY STREAM OF WATER FOR AT LEAST 15 MIN. LIFT
UPPER & LOWER EYELIDS FREQUENTLY. GET PROMPT MED ATTN. SKIN: REMOVE
CONTAM CLTHG & SHOES. WASH AFFECTED AREA W/MILD SOAP & PLENTY OF
WATER . IF IRRIT DEVELOPS, CONSULT MD. WASH CONTAM CLTHG BEFORE
REUSE. INHAL: REMOVE TO FRESH AIR. SUPPORT BRTHG (GIVE OXYGEN/ARTF
RESP) . INGEST: CALL POIS CTL CTR, EMER ROOM/MD. UNLESS (SUP DAT)

Fire Fighting

Flash Point Method:SCC
Flash Point:>200F,>93C
Extinguishing Media:SML FIRES: USE WATER (SPRAY, FOG/STREAM), FOAM, DRY
CHEM/CARBON DIOXIDE. LGE FIRES: WATER (SPRAY/STREAM)/STD FOAM.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

Accidental Release

Spill Release Procedures:STOP DISCHARGE & CONTAIN SPILL/CONTAM MATL
USING DIKE/BARRIER. IF A SUBSTANTIAL QTY IS SPILLED & CAN BE
PUMPED, RECOVER W/PUMPING EQUIP/VACUUM TRUCK. EXPLO-PROOF EQUIP
SHOULD BE USED IF THIS PROD IS F LAMM/COMBUST. OTHERWISE, USE
ABSORB SUCH (ING 16)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN COOL, DRY, WELL-VENTILATED
AREA. PROTECT FROM FREEZING. DO NOT STORE ABOVE 86F (30C). FOLLOW
GOOD MANUFACTURING AND HANDLING PRACTICES.
Other Precautions:THIS CONTAINER CAN BE HAZARDOUS WHEN EMPTY, BECAUSE
IT CAN RETAIN PRODUCT RESIDUES. THEREFORE, DO NOT REUSE CONTAINER
FOR FOOD, CLOTHING, OR PRODUCTS FOR HUMAN OR ANIMAL CONSUMPTION OR
WHERE SKIN CONT ACT MAY OCCUR.

Exposure Controls

Respiratory Protection:WHEN AIRBORNE CONCS ARE EXCEEDED, WEAR NIOSH
APPRVD EQUIP. DETERMINE APPROP TYPE BY CONSULTING RESP MFR. OBSERVE
RESP USE LIMITATIONS SPECIFIED BY NIOSH/MFR. HIGH AIRBORNE CONCS
MAY NECESSATE USE OF N IOSH APPRVD SCBA/SUPPLIED AIR (ING 13)
Ventilation:MINIMIZE EXPOSURE BY PROVIDING ADEQUATE VENTILATION.
GENERAL (DILUTION) VENTILATION MAY BE ACCEPTABLE. (ING 14)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH THORO AFTER HNDLG, ESP BEFORE EATING,
DRINKING, SMKNG/USING RESTROOM FACILITIES. CONTAM CLTHG & SHOES
(ING 15)
Supplemental Safety and Health
FIRST AID PROC: ADVISED OTHERWISE, INDUCE VOMIT BY GIVING EITHER SYRUP
OF IPECAC FOLLOWED BY 2 GLASSES OF WATER/BY STICKING FINGER DOWN
THROAT. IF PERS IS DROWSY/UNCON, DO NOT GIVE ANYTHING BY MOUTH/L
EAVE ALONE. NEVER GIVE ANYTHING TO DRINK TO A PERS WHO IS
CONVULSING/HAS NO GAG REFLEX. LOOSEN TIGHT FITTING (ING 3)

Chemical Properties

Spec Gravity:1.17 (H*2O=1)
Evaporation Rate & Reference:<0.1 (N-BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER
Percent Volatiles by Volume:100 WT

Stability

Stability Indicator/Materials to Avoid:YES
AMINES. OXIDIZING AGENTS. ACIDS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:IF HEATED TO HIGH TEMPERATURES, THIS
PRODUCT MAY EMIT SMOKE, SOOT, & TOXIC FUMES (CARBON DIOXIDE &
CARBON MONOXIDE).

Disposal

Waste Disposal Methods:IF DISCARDED IN ITS ORIGINAL UNUSED FORM, THIS
PROD DOES NOT MEET DEFINITION OF RCRA HAZ WASTE UNDER 40 CFR 261.
NEVERTHELESS, IT SHOULD BE MANAGED (STORED/TREATED/DISPOSED/ETC) AT
AUTHD FACILITY, IN COMPLIANCE W/ALL APPLIC FED, STATE, & LOC (ING
8)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.